Silicone concrete protectant

Clear concrete special protection coating system supporting product description

Primer: Excellent water resistance and fully penetrates into the concrete. Prevent water from entering. Used alone with the function of concrete curing agent, with good water retention performance, to prevent the rapid loss of water on the concrete surface caused by cracking.

Top coat: Excellent breathability and durability, ideal for aqueous substrates. It can prevent the substrate from aging, being polluted and the surface paint film from cracking and falling off due to internal moisture. So as to achieve a long time of fresh concrete.

Product performance features:

1, excellent protection performance: can penetrate into the cement substrate up to 6-10mm, waterproof and breathable protection of the substrate, unlike other protective materials only cover the surface of the substrate, easy to fall off, lose the protective effect.

2, product permeability: to ensure the drying of the inside of the concrete, to solve the ordinary breathable paint due to the evaporation of cement products due to the internal water caused by peeling phenomenon.

3, excellent waterproof performance: waterproof impregnation is like an invisible umbrella, even 0.2mm crack water can not enter

4, good acid and alkali resistance, to prevent the corrosion of concrete due to carbonization, snow melting agent (deicing salt)

5, improve the freeze-thaw stability of concrete

6, with a certain degree of mildew and algae resistance, to keep the concrete dry, clean appearance

7. Tested by relevant testing departments as water-based environment-friendly green products, odorless construction, simple and safe;

8, excellent durability: through

The testing department has tested that the artificial aging resistance time of more than 1000 hours is an excellent product, that is, after ten years, the transparent protection system of Hwan concrete still has good protection performance, without peeling, falling off, powder and other phenomena.

Conditions of action:

1, the low temperature below 5℃ or more than 80% of the high humidity will make the performance of the material can not play for a long time, the film, the main material performance is low, should avoid construction.

2, if in the rain, snow and before and after the construction, the loss of film will occur, the film is not good, if in the construction of rain, snow should immediately stop the construction, with protective film to protect the coating surface.

3, strong wind will occur uneven coating, paint flying, should avoid construction.

4, due to changes in meteorological conditions caused by the substrate, coating surface condensation, will cause the film bond is not good, please terminate the construction immediately.